BR18 and LCA: the climate requirements for new buildings in Denmark, 2025 to 2029

Guide · Updated 18 November 2026 · Written by DiFacto

Short answer

New buildings and extensions in Denmark must have an LCA under BR18 and stay below two limits. For applications from 1 July 2025, the building's limit is 4.0 to 8.0 kg CO2e per m² per year by building type, and the construction process has its own limit of 1.5. Indicative limits for mid-2027 and mid-2029 are lower, but not finally decided. The LCA must show the building as built.

BR18 is the Danish building regulations. Since 1 July 2025 they set two climate limits for new buildings, and lower limits are planned for 2027 and 2029. This page sets out the figures, what changes and who the requirement applies to. The Danish edition is BR18 og LCA.

What are BR18 and LCA?

LCA stands for life cycle assessment. It is a climate account for the building: the CO2e from the materials, from transport and work on the site, from replacement, from the energy for operation and from disposal. It is calculated over 50 years and ends in two figures in kg CO2e per m² per year: one for the building and one for the construction process.

The account is delivered when the building is reported complete. It must show what was actually built, not only what was on the drawings: «as built». How invoice lines become LCA data is in as-built LCA from purchase invoices.

LCA requirements and limit values for 2025, 2027 and 2029

For applications for a building permit from 1 July 2025, BR18 section 298 sets two limits. Both apply now.

  • The building: materials, replacement, energy for operation and disposal together (modules A1–A3, B4, B6 and C3–C4). 4.0 to 8.0 kg CO2e per m² per year, by building type.
  • The construction process: transport and work on the site together (A4–A5). 1.5 kg CO2e per m² per year for all building types. There is no rule on how it is split between A4 and A5.

Module D is part of the calculation, but not of the limits. What each module covers, and where the invoice can supply data for it, is in the LCA modules A1–A5. The table shows the figures in kg CO2e per m² per year.

Applies toFrom 1 July 2025Indicative, mid-2027Indicative, mid-2029
Holiday homes under 150 m² heated floor area4.03.63.2
Holiday homes of at least 150 m² heated floor area6.76.05.4
Detached, terraced, linked and semi-detached houses and farmhouses6.76.05.4
Blocks of flats, offices, retail and warehouses7.56.86.1
Other buildings, for example schools, nurseries and car parks8.07.26.4
Construction process (A4–A5), all building types1.51.31.1

Sources, both read 17 November 2026: the limits from 1 July 2025 are in BR18 section 298 on bygningsreglementet.dk. The figures for 2027 and 2029 are in table 2 of the supplementary agreement of 30 May 2024. The result is rounded to one decimal before it is compared with the limit (section 298(6)).

What changes from 2027

The agreement of 30 May 2024 plans two tightenings, in mid-2027 and mid-2029. The final figures are to be set from the latest knowledge and data, and there is no fixed date. The Danish Authority of Social Services and Housing calls the figures for 2027 and 2029 indicative limits that are not finally decided.

  • Mid-2027: 6.8 for blocks of flats and offices, 6.0 for detached and terraced houses, and 1.3 for the construction process.
  • Mid-2029: 6.1 for blocks of flats and offices, 5.4 for detached and terraced houses, and 1.1 for the construction process.

The indicative limits for 2029 are the same figures that BR18 uses today for the voluntary low-emission class (section 297(13) and (15)). The date of the application for a building permit decides which limit a project must meet. The figures for your building type and floor area are in the LCA limit calculator.

Who the requirement applies to

  • New buildings and extensions. Renovation without an extension is not covered, according to the authority's guidance, section 1.1. An extension is calculated on its own and must meet the limit for its own use. Extensions under 250 m² heated floor area to detached, terraced, linked and semi-detached houses, farmhouses and holiday homes are exempt (section 297(3)).
  • Exempt from the calculation: unheated buildings under 50 m², transportable structures and temporary, movable pavilions (section 297(2)).
  • Calculation, but no limit: for example hospitals, prisons, buildings for energy and water supply and the armed forces' operational buildings (section 298(9) and (10)).
  • Date of application. The new rules do not apply to applications for a building permit submitted before 1 July 2025 (executive order no. 271 of 2025, section 2).
  • Who delivers it. The building owner has the final responsibility and delivers the calculation when the building is reported complete. The consultant or the design-and-build contractor usually makes it. Contractors supply quantities, EPDs and consumption figures. More in LCA at handover (in Danish).

How DiFacto helps

DiFacto's climate calculation is an add-on for companies in construction. You upload your supplier invoices, or send them to your own DiFacto email address with the AutoPilot add-on. The system finds the materials on each line and matches each item to an EPD, an industry EPD or the state's generic data. Quantities are converted to kilos, and the purchase is split into what was built in and what was wasted.

Along the way you can see where the project stands against both limits. If the application is from 2027 or later, the system for now uses the indicative limits. When the building is finished, you get the BR18 report as a PDF and the account as an Excel file for the consultant. Energy on the site counts once you enter litres and kWh. The method step by step is in as-built LCA from purchase invoices.

Frequently asked questions

What are the LCA requirements in 2027 and 2029?

The indicative limits for mid-2027 and mid-2029 are 6.8 and 6.1 kg CO2e per m² per year for blocks of flats, offices, retail and warehouses, and 6.0 and 5.4 for detached, terraced, linked and semi-detached houses and farmhouses. For the construction process they are 1.3 and 1.1, against 1.5 for applications from 1 July 2025. They are indicative and not finally decided.

Who must do the LCA under BR18?

The building owner has the final responsibility and delivers the LCA when the building is reported complete. The consultant usually makes it in trade and main contracts, and the design-and-build contractor in a design-and-build contract. Contractors supply quantities, EPDs and consumption figures.

Do the requirements apply to extensions and renovation?

Extensions must have their own calculation and meet the limit for their use. Extensions under 250 m² heated floor area to houses, farmhouses and holiday homes are exempt. Renovation without an extension is not covered.

Can an as-built LCA be made from purchase invoices?

Yes, for the materials on the invoices. Each material line is converted to kilos, matched to an EPD or to the generic data in BR18 and multiplied by the figures for each module. Other parties' purchases and the energy for operation and the site come from other sources. See as-built LCA from purchase invoices.

Sources

Læs siden på dansk